TeamGroup T-Force Delta RGB DDR5 32GB (2×16GB) 6000MHz CL30 — White

The TeamGroup T-Force Delta RGB is a 32GB DDR5 memory kit split into two 16GB modules for dual-channel operation, running at 6000MHz with CL30 timings. It is built for gaming rigs and creator workstations on modern Intel and AMD platforms, and features a 120-degree RGB light bar with an aluminium heat spreader.

At a Glance

Key Features

CL30 timings, not CL36 — and it matters 

Most 6000MHz DDR5 kits ship at CL36 or CL38. This kit runs CL30, which means lower memory latency. In CPU-bound titles like racing sims and strategy games, tighter timings show up in more stable 1% low frame rates rather than in average FPS.

32GB is the comfortable tier for 2026

 16GB is now the floor, not the sweet spot. With modern titles using 12–14GB on their own, plus a browser, Discord and streaming software in the background, 32GB gives you genuine headroom without memory-related stutter.

XMP 3.0 and EXPO on the same kit 

The kit carries profiles for both platforms. Enable XMP 3.0 on Intel boards or EXPO on AMD AM5 boards — one toggle in BIOS, no manual voltage or timing tuning.

Aluminium spreader with air-cooler-friendly height
The aluminium heat spreader uses a relatively low profile, reducing the chance of clearance conflicts with large tower air coolers — a common headache with tall RGB memory.

This kit is right for you if you…

• Are building a new gaming rig on AM5 or Intel 12th gen and newer

• Game and stream simultaneously and need memory that does not fill up

• Edit video or work in 3D on medium-sized projects

• Want a ready white-themed RGB kit for a white build

Consider something else if…

• Your motherboard is DDR4 — DDR5 is physically incompatible, there is no adapter

• The PC is for office use only — 16GB is enough and cheaper

• Your case has no glass panel — you are paying for lighting you will not see

Recommended Build Pairing

To actually benefit from 6000 CL30, pair it with an X870 or B650 board and a Ryzen 7000/9000 CPU, or a Z790 board with Intel 13th/14th gen. Install both sticks in slots A2 and B2 (second and fourth) to enable dual channel correctly — this is the single most common installation mistake.

FAQ

Will DDR5 RAM work in a DDR4 motherboard?

 No. The socket and notch position are physically different, so the module cannot be installed at all. The motherboard must explicitly support DDR5.

What is the difference between 6000 CL30 and 6000 CL36?

 The clock speed is identical, but CL30 has lower latency. In practice this is a 2–5% difference in CPU-bound games and close to zero in office applications.

Do I need to enable XMP, or does it run at 6000MHz automatically?

 It will not run at 6000MHz automatically. Without enabling XMP or EXPO in BIOS the kit defaults to 4800MHz. Enabling it is a required step after installation.

Is 32GB overkill for gaming?

 Not in 2026. Modern titles consume 12–14GB, and if you stream or keep a browser open, 16GB genuinely fills up and causes stutter.

Can I add two more sticks later to reach 64GB?

 Technically possible on a four-slot board, but mixing DDR5 kits reduces stability and usually forces a speed reduction. Buying a full 64GB kit is the better route.