T-Force Delta RGB DDR5 RAM Memory 32GB 6400MHz CL32 Desktop Kit

The T-Force Delta RGB DDR5 32GB kit runs at 6400MHz with CL32 timings, placing it in the higher-frequency tier of the Delta series. It supports on-die ECC and Intel XMP 3.0 profiles, and suits high-performance gaming builds — particularly Intel platforms, which scale well above 6000MHz.

Key Features

•  6400MHz is where Intel CPUs actually scale

 Intel 13th and 14th gen processors handle frequencies above 6000MHz efficiently, unlike AMD's AM5 platform whose sweet spot sits around 6000. On an Intel build, moving from 6000 to 6400 delivers a real memory bandwidth gain.

• On-die ECC is built into the DDR5 standard 

Every DDR5 module carries error correction inside the chip itself, which is different from full server-grade ECC. The practical benefit is better stability at high frequencies and fewer errors under sustained load.

•  120-degree diffusion without visible LED hotspots

 The light bar uses an internal diffuser to spread illumination evenly instead of showing separate LED points, and it syncs with ASUS, Gigabyte, MSI and ASRock control software.

• 1.35V operating voltage

 It runs within the standard voltage envelope for 6400MHz, which means lower heat and better long-term stability than kits that need higher voltage to hit the same frequency.

 This kit is right for you if you…

• Are building on Intel 13th or 14th gen and want maximum memory throughput

• Game at 1080p or 1440p, where memory speed has the clearest impact

• Run bandwidth-sensitive workloads like compression or simulation

 Consider something else if…

• You are on AMD AM5 — a 6000 CL30 kit is the better match because of Infinity Fabric synchronisation

• You have a budget four-slot board — hitting a stable 6400MHz may not be achievable

• You need capacity over speed — a slower 64GB kit may serve you better

Recommended Build Pairing

Pair this kit with a Z790 or Z890 board using a two-DIMM layout, which reaches high frequencies more reliably than four-slot designs, alongside an Intel Core i5-14600K or i7-14700 and above. Enable XMP in BIOS immediately after installation.

FAQ

Is 6400MHz always better than 6000MHz?

 Not always. On Intel, usually yes. On AMD AM5, 6000 CL30 typically wins in practice because it maintains a 1:1 Infinity Fabric ratio, while 6400 can break that ratio and reduce performance.

What does on-die ECC mean?

 It is error correction performed inside the memory chip itself and is a mandatory part of the DDR5 standard. It does not replace server ECC, but it improves stability at high frequencies.

Will this run on a B760 motherboard?

 It will run, but most B760 boards cannot guarantee a stable 6400MHz. A Z790 board is the safer choice for hitting the rated speed.

Does it need extra cooling?

 No. The heat spreader is sufficient for rated operation inside a case with normal airflow.

Can I run it slower than 6400MHz? 

Yes. You can manually set 6000 or 5600 in BIOS if you need extra stability on a board that struggles with high frequencies.